5 Easy Steps to Make a Paracord Grip

Published 7 July 2026

If you're looking for a way to add some extra flair to your knife or tool, or if you simply want to improve your grip, making a paracord grip is a great option. It's relatively simple to do and can be customized to your liking. Plus, it's a great way to use up leftover paracord.

To make a paracord grip, you will need:

First, you need to determine how long you want your grip to be. Once you know the length, you can cut the paracord to size. Next, you need to melt the ends of the paracord to prevent them from fraying. You can do this with a lighter or a heat gun. Once the ends are melted, you can start wrapping the paracord around the handle of the knife or tool. Start by wrapping the paracord around the base of the handle and then work your way up. As you wrap, make sure to pull the paracord tight so that it doesn't come loose.

Choosing the Right Paracord

When selecting paracord for your grip, several factors should be considered:

Material

Paracord is primarily made of nylon, known for its durability, strength, and resistance to abrasion and moisture. Type III paracord is the most popular choice for grips due to its moderate diameter (550 lbs tensile strength) and flexibility.

Thickness

Paracord thickness is measured in millimeters (mm). For grips, thicknesses ranging from 4mm to 6mm are ideal. Thicker paracord provides a more secure grip, while thinner paracord offers greater flexibility and maneuverability.

Color and Pattern

Paracord comes in a wide range of colors and patterns, allowing you to customize the look of your grip. Consider the color scheme of your weapon or equipment when selecting the paracord. Patterns such as cobra weave or Solomon bar can also enhance the aesthetic appeal and grip texture.

Tensile Strength

Tensile strength refers to the amount of force that the paracord can withstand before breaking. For grips, a tensile strength of 550 lbs or higher is generally sufficient. Higher tensile strength paracord provides increased durability and resistance to wear and tear.

Getting the Grip Length Right

The ideal length for your paracord grip will depend on the size of your knife and personal preference. Here's a simple method to determine the correct length:

Measuring the Knife Handle

Start by wrapping the paracord around the handle of your knife, starting at the pommel. Wrap it snugly but not too tightly, and continue until you reach the desired length. Mark the spot where the paracord overlaps itself, which will be the end of your grip.

Adjusting the Length

Unwrap the paracord and measure the length from the pommel to the mark you made. This will give you the length of paracord needed for your grip. However, it's best to add an extra 2-3 inches to allow for adjustments and shrinkage during the wrapping process.

Testing the Length

Before wrapping the grip, loosely wrap the paracord around the handle again to ensure the length is comfortable. If it feels too short or too long, adjust the length accordingly and measure it again until you find the ideal fit.

Making the Cobra Knot Termination

The Cobra knot is a popular and intricate knot for paracord grips. To make a Cobra knot termination, follow these steps:

1. Begin with a core strand and two outer strands.

The core strand should be long enough to wrap around the handle of your grip, while the outer strands should be about twice as long as the core strand.

2. Wrap the outer strands around the core strand.

Cross the right outer strand over the core strand, then cross the left outer strand over the right strand. Pull the strands tight to secure them.

3. Repeat steps 2 and 3 until you reach the desired length.

Continue wrapping the outer strands around the core strand in the same pattern, alternating between crossing the right and left strands over. As you wrap, the knot will begin to take shape and form a cobra-like pattern.

To finish the termination, tuck the ends of the outer strands through the Cobra knot and pull them tight. Trim any excess paracord and melt the ends to prevent fraying.

Finishing the Grip with a Keeper Knot

To finish the grip with a keeper knot, start by making a small loop in the working ends of the paracord, about 2-3 inches from the end of the grip. Pass the right-hand cord through the loop made by the left-hand cord, creating a clove hitch. Then, pass the left-hand cord through the loop made by the right-hand cord, tightening the clove hitch. Repeat this process, creating several clove hitches at intervals down the length of the gap.

Once you have made enough clove hitches to reach the end of the grip, cut off the excess working ends of the paracord, leaving about 2 inches of cord left. Carefully tuck the ends of the excess cord back into the grip, creating a neat and tidy finish. If desired, you can use a lighter to slightly melt the ends of the excess cord, preventing them from fraying.

In addition to the clove hitch, there are several other knot variations that you can use to finish the keeper knot on your paracord grip. These variations include the diamond knot, the double diamond knot, and the snake knot. Each knot has its own unique look and feel, so experiment with different knots to find one that you like the best.

Adding a Butt Cap for Protection

A butt cap is a valuable addition to any paracord grip, offering an extra layer of protection and durability. Here are the steps to add a butt cap to your grip:

1. Gather the Materials

2. Prepare the Butt Cap

3. Align the Butt Cap

4. Secure the Butt Cap

5. Tighten and Trim the Paracord

Once the paracord is secure, trim any excess using a sharp knife or scissors.

6. Allow the Adhesive to Dry

Slotting the Paracord for Customization

To personalize your paracord grip, you can incorporate slots into it. Slots allow you to attach additional accessories, such as a lanyard, zipper pull, or key ring. Here's a detailed guide to slotting the paracord:

Materials You'll Need:

Instructions:

1. Measure and Cut the Paracord: Determine the desired length of your grip and cut the paracord to that measurement.
2. Braid the Paracord: Braid the paracord using your preferred braiding pattern.
3. Mark the Slot Locations: Decide where you want the slots to be located and mark those positions on the braided paracord.
4. Cut the Slots: Using scissors, carefully cut two parallel cuts at each marked position to create a slot. Be precise and avoid cutting into the adjacent paracord.
5. Slide the Core Out: Gently slide the inner core of the paracord out of the slotted area.
6. Tuck the Core into the Slot: Take one end of the core and tuck it into one of the slots. Then, fold the core over and tuck the other end into the opposite slot. Pull the core tight to secure it. If desired, you can use a lighter to slightly melt the core ends for added durability.
7. Repeat for Additional Slots: Follow steps 4-6 to create as many slots as desired.
8. Finish the Grip: After all the slots are complete, finish the paracord grip by wrapping the ends and securing them with a knot or glue.

Adding a Lanyard Hole for Versatility

For added functionality, you can incorporate a lanyard hole into your paracord grip. This enables you to attach your tool securely to your belt, backpack, or other gear, preventing accidental loss. To create a lanyard hole:

1. Wrap the Paracord: Continue wrapping the paracord around the handle, leaving a small loop at the end for the lanyard hole.
2. Secure the Loop: Use a small zip tie or a needle and thread to secure the loop in place.
3. Trim the Excess: Cut off any excess paracord beyond the secured loop.
4. Attach a Lanyard: Thread a lanyard or cord through the hole for easy attachment to other gear.

Sealing the Grip for Durability

Once the paracord grip is complete, it's crucial to seal it to enhance its durability and prevent fraying or unraveling. Here's a detailed guide on how to seal your paracord grip:

Materials:

• Heat gun or lighter
• Scissors
• Heat-shrink tubing (optional)

Steps:

1. Prepare the grip: Trim any excess paracord ends and remove any loose strands.
2. Heat the paracord: Use a heat gun or lighter to gently heat the paracord grip. Avoid holding the flame too close, as it can scorch the cord.
3. Melt the fibers: As the paracord heats up, the fibers will start to melt and fuse together. Continue heating until the grip becomes smooth and uniform.
4. Use heat-shrink tubing (optional): For added durability, you can slide heat-shrink tubing over the grip before heating. This will provide an extra layer of protection against wear and tear.
5. Cool the grip: Once the grip is heated, allow it to cool completely before handling.
6. Repeat the process: If desired, you can repeat steps 2-5 to apply multiple layers of seal for maximum durability.
7. Trim excess heat-shrink tubing: If using heat-shrink tubing, trim any excess material once it has cooled.
8. Enjoy your sealed paracord grip: Your grip is now protected from fraying and damage, ensuring its longevity.

Maintaining the Grip's Appearance

To ensure your paracord grip retains its aesthetic appeal, consider the following maintenance tips:

Cleaning and Disinfection

Wipe the grip gently with a damp cloth to remove dirt and debris. Avoid using harsh chemicals as they can damage the cord.

Protecting from UV Exposure

Prolonged exposure to UV rays can weaken and fade the paracord. When not in use, store the grip in a cool, shaded area.

Managing Abrasions

If the grip develops abrasions from repeated use, you can gently brush them away with a soft-bristled brush or sandpaper. Avoid over-sanding to prevent damaging the cord.

Rejuvenating Color

To revive the color of the paracord, you can apply a leather conditioner or fabric dye. Ensure that the product is compatible with paracord before using it.

Dealing with Knots

If knots form in the grip, you can carefully untie them or use a knot-picking tool. Do not pull or cut the knots as this can compromise the grip's integrity.

Preventing Fraying

To prevent the ends of the paracord from fraying, you can use heat shrink tubing or apply a small amount of clear glue to the tips.

Storing Properly

When storing the paracord grip, avoid placing it in direct contact with sharp objects that could cut the cord.

Frequency of Maintenance

The frequency of maintenance depends on how often you use the grip. Regularly inspect it for signs of wear or damage and perform maintenance accordingly.

Professional Cleaning

If the grip becomes heavily soiled or damaged, you can consider having it professionally cleaned or repaired.

Troubleshooting Common Issues

1. Paracord is too tight

If the paracord is too tight, it will be difficult to hold and use the knife. Loosen the paracord by uncoiling it from the top and bottom of the handle. Once you have loosened the paracord, you can re-tighten it by wrapping it around the handle in the same direction as before.

2. Paracord is too loose

If the paracord is too loose, it will not provide a secure grip on the knife. Tighten the paracord by wrapping it around the handle in the opposite direction as before. You can also try using a different knot to secure the paracord.

3. Paracord is fraying

If the paracord is fraying, it is important to replace it as soon as possible. Fraying paracord can become weak and break, which can cause the knife to become unusable. To replace the paracord, simply untie the old paracord and tie on a new piece of paracord in its place.

4. Paracord is not evenly spaced

If the paracord is not evenly spaced, it will not look as good and it will not provide a comfortable grip. To fix this, simply loosen the paracord and re-wrap it around the handle, making sure to space the paracord evenly.

5. Paracord is too long or too short

If the paracord is too long, it will be difficult to hold and use the knife. If the paracord is too short, it will not provide a secure grip on the knife. To fix this, simply cut the paracord to the desired length.

6. Knots are not tight enough

If the knots are not tight enough, the paracord will loosen and the knife will become unusable. To fix this, simply tighten the knots by pulling on the loose ends of the paracord.

7. Knife is not centered in the grip

If the knife is not centered in the grip, it will be difficult to hold and use the knife. To fix this, simply adjust the paracord so that the knife is centered in the grip.

8. Grip is too bulky

If the grip is too bulky, it will be difficult to hold and use the knife. To fix this, simply remove some of the paracord from the grip.

9. Grip is too slippery

If the grip is too slippery, it will be difficult to hold and use the knife. To fix this, simply add some rubber or other non-slip material to the grip.

10. Other issues

In addition to the common issues listed above, you may also encounter other issues when making a paracord grip. If you encounter any other issues, simply try to troubleshoot the problem and find a solution. With a little patience and perseverance, you should be able to make a paracord grip that is perfect for your needs.

How to Make a Paracord Grip

A paracord grip is a great way to add some extra comfort and style to your knife. It's also a relatively easy project that can be completed in a few hours. Here's how to do it:

1. Gather your materials. You will need:
• Paracord (550 cord) in your desired color
• Knife
• Scissors
• Lighter
2. Cut the paracord. You will need two pieces of paracord, each about 12 inches long.
3. Wrap the paracord around the knife handle. Start by wrapping one piece of paracord around the top of the handle, just below the blade. Then, wrap the other piece of paracord around the bottom of the handle, just above the butt cap.
4. Tighten the paracord. Once you have wrapped the paracord around the handle, tighten it by pulling on the ends. Be careful not to overtighten the paracord, or you could damage the knife handle.
5. Burn the ends of the paracord. Once you have tightened the paracord, burn the ends to prevent them from fraying.
6. Enjoy your new paracord grip!
   

   People Also Ask

   What is the best type of paracord to use?

   There are many different types of paracord available, but the best type for making a grip is 550 cord. 550 cord is a strong and durable material that is available in a variety of colors.

   How long should the paracord be?

   The length of the paracord will depend on the size of your knife handle. However, a good rule of thumb is to cut two pieces of paracord that are each about 12 inches long.

   How do I tighten the paracord?

   Once you have wrapped the paracord around the handle, tighten it by pulling on the ends. Be careful not to overtighten the paracord, or you could damage the knife handle.